CH 1 Arterglow times of SL SYSTEMS in comparison with the DIN 67510 norm

CH 2 f & p SL/2 SYSTEM timesteps with glowing values after 2,10,30,60,120 min in comparison withe the DIN 67510 standard.

CH 3 f & p SL/5 SYSTEM timesteps with glowing values after 2,10,30,60,120 min in comparison withe the DIN 67510 standard.

WHY HAVING GOOD TIMESTEPS WITH GLOWING VALUES IS IMPORTNANT IN EMERGENCY

It is importnant to show good glowsteps values because: Regarding the statiscts data that show that during average fire intensity that takes place in a building, the rescue ac tions and emergency should be led in a time of 40 minutes. Because after that mostly there are tiny chances to save ones lives. So the statistic intensity of fire the emergency escape action should take about 30 minutes. That is why we show the steps data which are really good. Because during exactly that time the emergency action should be taken and the glowing intensity of the safety signs is MOST IMPORTANT. Showint the afterglow time as many companies is god, but sometimes it is absolutely unnecessary to manuracture signs glowing for 5000 min as some companies does. We put most of the stress on that how the glowing behaves after 10, 30 and the 60 minutes. Of coure Afterglow time is importnant, becuse it is connected with the good timesteps in glowing values, but not always (please see our charts - exponential shape of function) .Try to imagine what would happen in a builbing that average fire took place after for example 5000 minutes that give 83 hours and that gives 3,5 days in a fire. After that time there will be no rescue action after more than 3 days. So we do not pay that much attention to the afterglow time as to timesteps in glowing values issues. We do not try to follow the international trend in showing the extreme afterglow times as a marketing action. We rather try to cunstruct the sign which will appear bestly in the most importnant time for human's life.

weight:	0,49 g /cm3
thickness:	about 1,9 mm
Luminiscence:	Measured in relation to the DIN 67510 standard
Toxicity:	Non Toxic. The certificate of The National Institute of Hygiene in Warsaw HK / B /1045 / 01 / 2002
Radioactivity :	Non Radioactive - The Report of the Central Laboratory of Radiological Protection in Warsaw Nr Z-II / 52 / 04.2002
The range of usage temperatures:	- 40° C to + 90° C
Resistance to getting old:	While the 3 years research in rooms withe temperature above 0° C - no changes have been noticed.
Type of the glue:	Acril glue on a basis of polyurethane.
Resistance to cutting off from the steel:	In Relation to DIN EN 1943 in temperature + 23°C +/- 20°C = 40N/625 mm2
Resistance from tearing away from the steel:	In Relation to DIN EN 1943 in temperature + 23°C +/- 20°C = 28N/25 mm (stratification of the polyurethane foam)
Maximal final attachemant:	After 24 hours.
The Temperature of stocking:	Room Temperature and usual humidity 50 - 70%
Certificates:	1. National Institute of Hygiene in Warsaw 2. Central Laboratory of Radiological Protection in Warsaw 3. The Radiotecnical Institute in Gdansk 4. Polish Ship Registry PRS in Gdansk 5. CNBOP Jozefow 6. The Research Laboratory Of The Branch Office of Electrotecnical Institute in Gdansk
Resistance to the cyclical serial heat:	Humidity 98% and the temp. 25° C and 60° C The Research Laboratory Of The Branch Office of Electrotecnical Institute in Gdansk - No changes have been noticed.
Resistance to the low temperature:	-30°C The Research Laboratory Of The Branch Office of Electrotecnical Institute in Gdansk - No changes have been noticed.

---

Technical Parameters Of The luminescent Floor Systems

Название изделия:	Эвакуационные знаки и напольная разметка Толщина: около 0,13 мм
Thickness:	About 0,13 mm
Яркость:	Для SL/2 62,8/4,9 - 515 / DIN 67510 Для SL/5 115,0/9,0 - 815 / DIN 67510 Измерение яркости свечения проведено согласно стандурту DIN
Destination:	Floor routes and signs and for emergency routes in rooms liks production halls, magazines, passages etc.
Way of montage:	Sticking with self advesive included in the product after preparing the basis.
Ranges of usage temperatures:	- 40° C to + 90° C
Montage conditions:	The basis must be dry, smooth, free of dust and pollution and cleaned with alcohol.
Montage issues:	- Resistance to getting worn. - Resistance to chemical cleaning products - Resistance to huge mechanical loads (possiility of drive through by heavy equipment like fork lift trucks etc.)
Operation issues :	Signs and routes once stack, can not be used once again.

---

Every kind of sign can be luminescent of non luminescent depanding on the demand

We offer our signs in materials given below:

1) pn - non luminescent board 2) ps - luminescent board 3) fn - non luminescent foil 4) fs - luminescent foil 5) ts - luminescent TD SYSTEM® board 6) Alu - Aluminum

Every sign can be made in different kind of technology:

1) SL/2 2) SL/5 3) SL/8

Examples of usage of safety luminescent systems by TOP-DESIGN CHWASZCZYNO S.J